August 2016 Regulatory Update


US CPSC Votes for Proposed Rule Making to Exempt Certain Plastics from Phthalates Testing

On August 17, 2016, the Consumer Product Safety Commission (CPSC) issued a proposed rulemaking: Prohibition of Children’s Toys and Child Care Articles Containing Specified Phthalates: Determinations Regarding Certain Plastics.

View Story Read More

In an effort to reduce the cost of third party testing requirements consistent with assuring product compliance, the CPSC issued a draft notice of proposed rulemaking for determinations that certain plastics with specified additives would not contain phthalates that are prohibited in children’s toys and childcare articles. Upon approval, a draft rule will be published in the Federal Register and a public comment period will be open for 75 days.

Under the proposed rule, companies that manufacture or import children’s toys or childcare articles that contain accessible polyethylene, polypropylene, high impact polystyrene, or acrylonitrile butadiene styrene will not be required to third party test to assure compliance with Section 108 of the Consumer Products Safety Improvement Act (CPSIA). However, compliance with the 0.1% limit for the currently six prohibited phthalates is still be required.

US EPA Issues Final Rule for Composite Wood Products

On July 27, 2016, the Environmental Protection Agency (EPA) issued final rule 40 CFR Part 770 “Formaldehyde Emission Standards for Composite Wood Products”. The final rule implements formaldehyde standards for composite wood products to reduce formaldehyde emissions as required by the Compliance Monitoring Strategy of the Toxic Substances Control Act (TSCA).

View Story Read More

Formaldehyde is a colorless, flammable gas commonly found in resins used in the manufacture of composite wood products. It can cause irritation of the skin, eyes, nose, and throat. Additionally, high levels of exposure to formaldehyde may cause some types of cancers. To avoid adverse health effects caused by formaldehyde, the final rule includes emission limits that are applicable to domestic or imported hardwood plywood, medium-density fiberboard, particleboard, and finished goods containing these products. The reference standards will be ASTM E1333-10 and ASTM D6007-02 and the formaldehyde emission limits are listed below:

Type of composite wood Formaldehyde emission limits
Hardwood plywood made with a veneer core or a composite core 0.05 ppm
Medium-density fiberboard 0.11 ppm
Thin medium-density fiberboard 0.13 ppm
Particleboard 0.09 ppm

Apart from the emission standards, the final rule also establishes a certification program for third party certifiers (TPCs) of composite wood products. Under this program, TPCs will have to meet several qualifications in order to obtain accreditation to perform laboratory testing and provide oversight of formaldehyde emissions from manufactured and/or imported composite wood products.

The final rule is in prepublication stage and has not yet been published in the Federal Register. Once it is published, it will enter into force 60 days after the publication. One year after publication, composite wood products that are sold, supplied, offered for sale, manufactured, or imported in the United States will need to be labeled as TSCA Title VI compliant.

Updates of ASTM Standards

Below is a summary of recently updated ASTM standards that may be of interest to our clients:

View Story Read More
CPSIA / CFR Reference ASTM Standard No. Detail
- ASTM F381-16

Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines

Covers the components, the assembly, and the use of consumer trampolines and intends to reduce the demonstrated hazards associated with the use of trampolines by consumers in home environments.

16 CFR 1112 & 1231 (Proposed) ASTM F404-16a

Standard Consumer Safety Specification for High Chairs

Covers the performance requirements and methods of test to ensure the satisfactory performance of the high chair and high chairs created by using a high chair conversion kit and component(s) from another product.

- ASTM F1004-16b

Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures

Covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and expandable enclosures.

- ASTM F2388-16

Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use

Covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing tables and other changing products such as contoured changing pads and add-on changing units that are sold separately for use on furniture products other than changing tables.

16 CFR 1112, 16 CFR 1130 & 16 CFR 1232 (proposed) ASTM F2613-16e1

Standard Consumer Safety Specification for Children's Chairs and Stools

Establishes testing requirements for structural integrity and performance requirements for children’s chairs and stools. It also provides requirements for labeling.

- ASTM F2666-16

Standard Specification for Aboveground Portable Pools for Residential Use

Provides safety and performance requirements for portable pools for residential use and addresses pool hazards including childhood drowning, sanitation, electrical safety, and entrapment.

US State California OEHHA Adds New Chemicals to Proposition 65 List

In July and August 2016, the California Office of Environmental Health Hazard Assessment (OEHHA) added 8 new chemicals to the Proposition 65 List and added new toxicity to existing chemical, 1-bromopropane. The new chemicals are:

  1. Sedaxane
  2. Atrazine
  3. Des-ethyl atrazine (DEA)
  4. Des-isopropyl atrazine (DIA)
  5. 2,4-Diamino-6-chloro-s-triazine (DACT)
  6. Propazine
  7. Simazine
  8. Bromodichloroacetic acid
View Story Read More

The added chemicals meet the requirements for listing as known to the State of California to cause cancer, developmental toxicity and female reproductive toxicity for purposes of Proposition 65. The chemical details are provided below:

Chemical Chemical Abstracts Service Number (CAS No.) Types of Toxicity
Sedaxane 874967-67-6 Cancer
Atrazine 1912-24-9 Developmental toxicity
Female reproductive toxicity
Des-ethyl atrazine (DEA) 6190-65-4 Developmental toxicity
Female reproductive toxicity
Des-isopropyl atrazine (DIA) 1007-28-9 Developmental toxicity
Female reproductive toxicity
2,4-Diamino-6-chloro-s-triazine (DACT) 3397-62-4 Developmental toxicity
Female reproductive toxicity
Propazine 139-40-2 Developmental toxicity
Female reproductive toxicity
Simazine 122-34-9 Developmental toxicity
Female reproductive toxicity
Bromodichloroacetic acid 71133-14-7 Cancer
1-Bromopropane (1-BP) 106-94-5 Cancer

US State California DTSC Seeking Public Comment on the Listing of Flame Retardant Containing Children’s Sleep Products as a First Priority Product

On July 15, 2016, the California Department of Toxic Substances Control (DTSC) opened a 45-day comment period for the proposal to list Children’s Foam-Padded Sleeping Products containing TDCPP or TCEP as a Priority Product to be regulated under the Safer Consumer Products (SCP) Regulations.

View Story Read More

As part of the Department of Toxic Substances Control (DTSC) Safer Consumer Products regulations that took effect October 1, 2013, an initial list of Priority Products containing “Candidate Chemicals” - that is chemicals that have a hazard trait that can harm people or the environment - was to be identified. A proposed list of three product-chemical combinations was released on March 13, 2014 and includes:

  • Paint Stripper with Methylene Chloride
  • Spray Polyurethane Foam Systems Containing Unreacted Methylene Diphenyl Diisocyanates (MDI)
  • Children's Foam-Padded Sleeping Products with TDCPP or TCEP

Through research, the DTSC determined that children may be at risk for adverse health effects if they use or are near children’s foam-padded sleeping products that contain the following flame retardant chemicals:

  1. Tris(1,3-dichloro-2-propyl) Phosphate (TDCPP) (CAS No. 13674-87-8)
  2. Tris(2-chloroethyl) Phosphate (TCEP) (CAS No. 115-96-8)

The rulemaking to list Children’s Foam-Padded Sleeping Products containing the flame retardants TDCPP and TCEP as a Priority Product began with the initiation of the comment period. Examples of products that may be impacted by the pending SCP regulations include:

  1. Nap mats
  2. Soft-sided portable cribs
  3. Play pens
  4. Infant sleep positioners
  5. Co-sleepers

Once Children’s Foam-Padded Sleeping Products are finalized as Priority Products, the rulemaking may take up to one year, after which businesses that manufacture, import, distribute, sell, or assemble the products will have to identify and evaluate alternatives that reduce adverse impacts of the product containing the chemicals of concern. The comment period will end with a public hearing on August 29, 2016.

US City and County of San Francisco, California Approves Regulation to Prohibit the Sale of Certain Polystyrene Foam Products

On July 29, 2016, the proposal to amend Environment Code - Food Service and Packaging Waste Reduction was approved by Mayor Edwin Lee to ban certain products made from polystyrene foam.

View Story Read More

The amendment revises the existing law that requires using compostable or recyclable food service ware in restaurants, by retail food vendors etc. As a result of the amendment, common food service products made of polystyrene such as plates, cups, egg cartons, coolers, and “to-go” containers, as well as other consumer products such as pool toys, beach toys, and packing peanuts will no longer be allowed after the effective dates, as detailed below:

Item Sale prohibited products made from polystyrene foam Effective date
1 Food service ware that was not either recyclable or compostable January 1, 2017
2 Packing material including shipping boxes and packing peanuts
3 Coolers, ice chests or similar containers
4 Pool or beach toys
5 Dock floats, mooring buoys or anchor or navigation markers
6 Egg cartons and meats trays that are not either recyclable or compostable July 1, 2017

US State Vermont Delays CHCC Reporting Deadline and Opens Online Reporting System

On June 1, 2016, HB 595 was approved which amends Chapter 38A of 18 V.S.A. 1775 “Chemicals of High Concern to Children” by updating the reporting date for manufacturers of children’s products that contain Chemicals of High Concern to Children (CHCC) (See Regulatory Recap: February 2016).

View Story Read More

The amendment to the Vermont Chemicals of High Concern to Children rule entered into force on July 1, 2016. It revises the deadline for manufacturers to report children’s products containing a listed CHCC that is intentionally added to a children’s product at a level above the Practical Quantification Limit (PQL) or is present as a contaminant at concentrations of 100 parts per million or greater. The new reporting requirements are summarized below:

Original reporting deadline New reporting deadline
July 1, 2016 and biennially thereafter First reporting: January 1, 2017
Second reporting: August 31, 2018 and biennially thereafter

In addition, Vermont has opened their online reporting system to allow manufacturers to begin reporting chemical disclosures now. A User Manual is available to guide manufacturers through the process. For the first reporting period beginning in 2017, data must be disclosed separately to the State of Vermont even if companies are also reporting to other states with CHCC reporting rules. It is expected that Vermont and other states will consider data sharing options at a later date.

Canada Adds Microbeads to List of Toxic Substances in Personal Care Products

On June 17, 2016, the Minister of the Environment published SOR/2016-150 in the Canada Gazette to amend Canadian Environmental Protection Act, 1999 (CEPA). The amendment entered into force on the publication date.

View Story Read More

In the amendment, Plastic Microbeads that are less than or equal to 5mm in size are added to the List of Toxic Substances in Canadian Environmental Protection Act, 1999. Adding plastic microbeads to this list enables the Minister of the Environment to propose risk management instruments under CEPA to manage environmental risks posed by plastic microbeads, should such instruments be deemed necessary.

CCPSA Regulation Amendment Summary

On June 22, 2016, regulations promulgated under the Canada Hazardous Products Act (HPA) were repealed by their new versions to align with the Canada Consumer Product Safety Act (CCPSA).

View Story Read More

When CCPSA came into force in 2011 and replaced HPA, several regulations under HPA were amended, replaced or newly enacted in order to prevent regulatory gaps from occurring during the transition. However, other regulations were not addressed at that time. Of particular concern was that the scope of application of some regulations was inconsistent with that of the CCPSA and some regulations still contained provisions more relevant to the HPA than the CCPSA, among other areas of misalignment. As announced in the Canada Gazette on July 13, 2016 these regulations have been repealed and amended as summarized below:

Regulations Repealed/Amended Version Currently Enforced Version Significant Changes in Requirements?
Asbestos Products Regulations SOR/2007-260 SOR/2016-164 No
Candles Regulations SOR/2011-18 SOR/2016-165 No
Carbonated Beverage Glass Containers Regulations SOR/80-831 SOR/2016-166 No
Carriages and Strollers Regulations SOR/85-379 SOR/2016-167 No
Cellulose Fibre Insulation Regulations Hazardous Products (Cellulose Insulation) Regulations SOR/79-732 SOR/2016-177 Performance requirement is updated
Charcoal Regulations The Hazardous Products (Charcoal) Regulations C.R.C., c. 924 SOR/2016-178 No
Children’s Jewellery Regulations SOR/2011-19 SOR/2016-168 No
Children’s Sleepwear Regulations SOR/2011-15 SOR/2016-169 No
Consumer Chemicals and Containers Regulations, 2001 — Regulations Amending Canada Consumer Product Safety Act SOR/2001-269 SOR/2001-269 amended by SOR/2016-170 - Updated version of reference standards
- Updated responsibility to responsible person
Consumer Products Containing Lead (Contact with Mouth) Regulations — Regulations Amending Canada Consumer Product Safety Act SOR/2010-273 SOR/2010-273 amended by SOR/2016-171 No
Corded Window Covering Products Regulations SOR/2009-112 SOR/2016-172 No
Expansion Gates and Expandable Enclosures Regulations Hazardous Products (Expansion Gates and Expandable Enclosures) Regulations SOR/90-39 SOR/2016-179 No
Face Protectors for Ice Hockey and Box Lacrosse Players Regulations SOR/2011-20 SOR/2016-173 No
Glass Doors and Enclosures Regulations SOR/2009-110 SOR/2016-174 No
Glazed Ceramics and Glassware Regulations SOR/98-176; SOR/2007-30, s. 1; SOR/2009-179, s. 5 SOR/2016-175 No
Ice Hockey Helmet Regulations SOR/2011-21 SOR/2016-186 No
Infant Feeding Bottle Nipples Regulations Hazardous Products (Infant Feeding Bottle Nipples) Regulations SOR/84-271 SOR/2016-180 No
Kettles Regulations Hazardous Products (Kettles) Regulations C.R.C., c. 927 SOR/2016-181 No
Lighters Regulations SOR/2008-231 SOR/2016-187 No
Matches Regulations Hazardous Products (Matches) Regulations C.R.C., c. 929 SOR/2016-182 No
Mattresses Regulations Hazardous Products (Mattresses) Regulations SOR/80-810 SOR/2016-183 Updated reference standard to CAN/CGSB-4.2 No. 27.7-2013
Pacifiers Regulations Hazardous Products (Pacifiers) Regulations C.R.C., c. 930 SOR/2016-184 Updated structural integrity test procedure
Phthalates Regulations SOR/2010-298 SOR/2016-188 No
Playpens Regulations C.R.C., c. 932 SOR/2016-189 No
Residential Detectors Regulations SOR/2009-193 SOR/2016-190 Updated version of reference standards
Restraint Systems and Booster Seats for Motor Vehicles Regulations SOR/2011-16 SOR/2016-191 No
Science Education Sets Regulations Science Education Sets Regulations C.R.C., c. 934 SOR/2016-192 No
Surface Coating Materials Regulations SOR/2005-109 SOR/2016-193 No
Tents Regulations Hazardous Products (Tents) Regulations SOR/90-245 SOR/2016-185 No
Textile Flammability Regulations SOR/2011-22 SOR/2016-194 No
Textile Floor Coverings Regulations Hazardous Products (Carpet) Regulations C.R.C., c. 923 SOR/2016-176 Added specification for “Carpet tile or large textile floor covering — indoor only, or indoor and outdoor
Added new specification for textile floor covering that is
- treated with flame retardants
- Not treated with flame retardants
Toys Regulations — Regulations Amending Canada Consumer Product Safety Act SOR/2011-17 SOR/2011-17 amended by SOR/2016-195 No


EU Proposes Amendment to Revise the BPA Migration Limit of Toys Directive

On July 18, 2016, the European Union (EU) published a proposed amendment to Directive 2009/48/EC Safety of Toys. The proposed amendment revises the migration limit of Bisphenol A (BPA) in toy products intended for use by children under 36 months or to be placed in the mouth.

View Story Read More

Once the amendment passes, the migration limit of BPA lowered from 0.1 to 0.04 mg/L (ppm). The referenced methods for the determination are:

  1. EN 71-10:2005 Safety of toys - Organic chemical compounds - Sample preparation and extraction
  2. EN 71-11: 2005 Safety of toys - Organic chemical compounds - Methods of analysis

France Updates Childcare Articles Standard Providing Presumption of Conformity to Decree 91-1992

On June 29, 2016, a notice regarding childcare articles standards was published in the French Official Gazette No. 150 (NOR: ENC1617355V). The notice contains a list of standards which show presumption of conformity to the Decree No. 91-1292 Prevention of Risks Resulting from the Use of Child Care Articles.

View Story Read More

The standards showing presumption of conformity to Decree No. 91-1292 are listed in the table below:

Standard Repealed Standard Effective date^
NF EN 716-1 + A1 (February 2013)
Furniture: beds in fixed and folding platform for domestic use for children - Part 1: Safety requirements
NF EN 716-1
(May 2008)
NF EN 716-2 + A1 (February 2013)
Furniture: beds in fixed and folding platform for domestic use for children - Part 2: Test methods
NF EN 716-2
(May 2008)
NF EN 1130-1 (May 1996)
Furniture, household Cots - Part 1: Safety requirements
NF EN 1130-2 (May 1996)
Furniture, household Cots - Part 2: Test methods
NF EN 1272 (June 1998)
Childcare articles: Table Seats - Safety requirements and test methods
NF EN 1273 (August 2005)
Childcare articles: Trotters - Safety requirements and test methods
NF EN 1466 (November 2014)
Childcare articles: Carry cots and stands - Safety requirements and test methods
NF EN 1466 + A1 (February 2008) September 1, 2016
NF EN 1888 (April 2012)
Childcare articles: prams - Safety requirements and test methods
NF EN 1930 (February 2012)
Childcare articles: safety barriers - Safety requirements and test methods
EN 12221-1 + A1 (October 2013)
Childcare articles: Changing Devices for domestic use - Part 1: Safety requirements
NF EN 1222-1
(July 2008)
EN 12221-2 + A1 (October 2013)
Childcare articles: Changing Devices for domestic use - Part 2: Test methods
NF EN 1222-2
(July 2008)
NF EN 12227 (December 2010)
Domestic parks - Safety Requirements and Test Methods
NF EN 12790 (June 2009)
Childcare articles: loungers
NF EN 13209-1 (December 2004)
Childcare articles: Holder children - Safety requirements and test methods - Part 1: dorsal Holder children with armature
NF EN 13209-2 (February 2016)
Childcare articles: Holder children - Safety requirements and test methods - Part 2: Soft Carrier child
NF EN 13209-2
(November 2005)
June 1, 2017
NF EN 13210 (December 2004)
Childcare articles: harnesses, leashes for walking and similar items for children - Safety requirements and test methods
NF EN 14036 (January 2004)
Childcare articles: vertical oscillation platforms - Safety requirements and test methods
NF EN 14344 (March 2005)
Childcare articles: Child seats for bicycles - Safety requirements and test methods
EN 14988-1 + A1 (October 2012)
Highchairs - Part 1: Safety requirements
NF EN 14988-1
(June 2006)
July 1, 2015
EN 14988-2 + A1 (October 2012)
Highchairs - Part 2: Test methods
NF EN 14988-2
(June 2006)
July 1, 2015
NF EN 16120 + A1 (June 2014)
Childcare articles: Booster chair
NF EN 16232 (September 2013)
Childcare articles: Swings suspended for children
NF D 60-300-4 (November 2012)
Children's furniture - Domestic use - Part 4: Requirements and test methods without pod beds
NF S 54-042 (June 2012)
Childcare articles: Thermometers bath - Specifications and markings
NF S 54-043 (September 2015)
Childcare articles: Rain linings - Minimum requirements for safety and testing
NF S 54-043
(May 2008)
June 1, 2017
NF S 54-045 (December 2014)
nursery furniture and for child- Bunks for children for public use - Safety requirements and test methods

^ The new standard applies to products that are manufactured or imported after the effective date.

Europe Recalls Summary (June and July 2016)

In Europe, when hazards are identified in consumer products, the products will be recalled and published in the Rapid Alert System, which is updated weekly. The European recalls for June and July 2016 are summarized below:

View Story Read More
Hazard Frequency
Chemical Hazard^ 50
Electric Shock Hazard 40
Choking Hazard 37
Injury Hazard 33
Fire Hazard 18
Burn Hazard 8
Strangulation Hazard 8
Violation of CLP Regulation 6
Other Hazards* 23

^ Chemical Hazard includes Violation of Cosmetic Product Regulation, Violation of Directive on Packaging and Packaging Waste, Violation of National Legislation, Violation of POP Regulation, Violation of REACH Regulation and Violation of Toy Safety Directive

* Other Hazards include Asphyxiation Hazard, Drowning Hazard, Entrapment Hazard, Laceration Hazard, Microbial Hazard, Suffocation Hazard, Violation of Cosmetic Product Regulation, Violation of Low Voltage Directive and Violation of RoHS 2 Regulation with frequency less than 5.

Product Categories Frequency
Toys and Childcare Articles 78
Lighting 21
Cosmetics 16
Home Electrical Appliances (Hair dryer, iron, etc.) 14
Computer / Audio / Video / Other Electronics & Accessories 13
Consumer Chemicals 11
Fabric / Textile / Garment / Home Textile 9
Candles & Burning Items and Accessories 6
Footwear 6
Other Categories# 11

# Other Categories include Food Contact Material, Furniture, Jewelry, Personal Protective Equipment (exclude eye protection), Sporting Goods / Equipment and Tools and Hardware with frequency less than 5.

Download the complete Recalls Summary - Europe (Last Update Date: July 31, 2016)


Australia ACCC Mandates Safety Standards for Hoverboards

On July 17, 2016, the Australian Competition & Consumer Commission (ACCC) published a list of mandatory standards for hoverboards, also known as self-balancing scooters, in order to reduce the risk of death or serious injury caused from unsafe self-balancing scooters.

View Story Read More

The mandatory standards required for hoverboards are identical to those listed during the previous 60-Day interim ban (See Regulatory Recap: April 2016). The notice replaced the interim ban and the safety standards became mandatory under the Australian Consumer Law. They will be in force for two years from July 17, 2016 while regulators develop a longer-term solution.

Australia ACCC Publishes Guidance Document for Safety of Button Cell Containing Products

On July 17, 2016, the Australian Competition & Consumer Commission (ACCC) published a guidance document, Industry Code for Consumer Goods That Contain Button Batteries. The purpose for issuance is to reduce the risk of death and life threatening injuries to children from unsafe button batteries. The document guides responsible persons including manufacturers, distributors, importers and retailers of button cell containing products to make decisions about button battery safety when the products are being procured, designed, developed or sold.

View Story Read More

In the guidance document, essential requirements for safe button cell containing products are provided. Consumer products containing one or more replaceable button batteries that are likely to be accessible to young children under normal use or reasonable foreseeable misuse must meet following requirements:

  1. Be designed and manufactured so that the batteries are inaccessible to young children
  2. Have a battery compartment that requires a tool to access the battery, or that requires two or more independent and simultaneous actions to remove its cover
  3. Provide information indicating that button battery is required for operation at point of sale

Apart from the essential requirements to be safe, the document suggests several safety standards that are helpful to assess the safety of the products containing button batteries. The standards are listed below:

  1. AS 1928 -2007 - Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2003, MOD)
  2. AS 5808 -2009 - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products (EN 862:2005, MOD)
  3. AS/NZS 3820 - Essential safety requirements for electrical equipment
  4. AS/NZS 3100 - General requirements for electrical equipment
  5. AS/NZS 60335.1:2011 + A1 + A2 + A3 - Household and similar electrical appliances -Safety - Part 1: General requirements
  6. AS/NZS 60950.1:2015 Information Technology Equipment -Safety, Part 1: General requirements
  7. AS/NZS 62115: 2011 - Electric toys—Safety
  8. AS/NZS 60065:2012 A1:2015 - Audio, video and similar electronic apparatus—Safety requirements
  9. ASTM F963-11 - Standard Consumer Safety Specification for Toys Safety
  10. ANSI C18.3 Parts 1, 2 & 3 - American National Standard for Portable Lithium Primary Cells and Batteries
  11. IEC 60086 Part 4 & 5 -Primary batteries
  12. IEC 62368-1 Ed. 2 Audio/video, information and communication technology equipment - Part 1: Safety requirements
  13. UL 4200A:2015 - Standard for Safety for Products Incorporating Button or Coin Cell Batteries of Lithium Technologies

Australia Toys Standards AS/NZS ISO 8124 Part 1, 2 and 3 Updates

In June 2016, Australian standards for toys, AS/NZS ISO 8124 part 1, 2 and 3 were updated to the 2016 version. In general, the Australian standards were modified from ISO 8124:2014.

View Story Read More

The AS/NZS 8124 standards provide testing methods for physical and mechanical, flammability and heavy metal requirements. The updates of the AS/NZS ISO 8124 standards are summarized below:

Toys Standard Current Standard New Standard
AS/NZS 8124.1 Safety of Toys - Part 1: Safety aspects related to mechanical and physical properties AS/NZS ISO 8124.1:2013
(Identical to ISO 8124-1:2012)
AS/NZS 8124.1:2016
(Modify from ISO 8124-1:2014)
AS/NZS 8124.2 Safety of Toys - Part 2: Flammability AS/NZS ISO 8124.2:2009
(Identical to ISO 8124-2:2007)
AS/NZS 8124.2:2016
(Modify from ISO 8124-2:2014)
AS/NZS 8124.3 Safety of Toys - Part 3: Migration of Certain Elements AS/NZS 8124.3:2012
(Modify from ISO 8124-3:2010)
AS/NZS 8124.3:2012+A1:2016
(Modify from ISO 8124-3:2010+A1:2014)

Currently, the new standards are not adopted as mandatory standards in Australia and New Zealand for toys safety.

New Zealand Prohibits the Importation of Asbestos Containing Products

On June 15, 2016, a ban of products containing asbestos was announced on the official website of the New Zealand Government. Starting October 1, 2016, the importation of asbestos containing products will be prohibited.

View Story Read More

Due to the risk of respiratory disease caused by exposure of asbestos, the existing ban of raw asbestos is expanded to products which contain asbestos, such as gaskets, seals and brake linings. Existing asbestos containing buildings and products will continue to be managed through the Health and Safety at Work Act Regulations and, therefore, are out of the scope of this new prohibition.


Japan MHLW Approves Amendment on the JFSL Regarding Food Contact PEN Materials

On June 8, 2016, Japan Ministry of Health, Labour and Welfare (MHLW) approved the amendments to Japan Food Sanitation Law (JFSL). The amendments impact sectors that market and use food contact PolyEthylene Naphthalate (PEN) materials.

View Story Read More

The amendment adds new requirements for the Specific Migration Limit (SML) of Germanium (Ge) and evaporation residue requirements in the JFSL (See Regulatory Recap: April 2016). The new requirements will be enforced on December 8, 2016.

This summary is not intended to be exhaustive nor should it be construed as legal advice.

View the complete regulatory update
هل تحتاج إلى معلومات أخرى؟

سيصلك ردنا فى خلال ٢٤ ساعه


بتواصلك مع QIMA، فأنت توافق على سياسة الخصوصية والشروط والأحكام الخاصة بنا

Subscribe to our Regulatory Updates

Receive a monthly update on product safety standards news.

تلقى مستجدات سلسلة التوريد من قيمة. يمكنك دائمًا إلغاء الاشتراك وإدارة تفضيلات بريدك الإلكتروني لاحقًا.

بتواصلك مع QIMA، فأنت توافق على سياسة الخصوصية والشروط والأحكام الخاصة بنا

اتصل بنا عبر الهاتف

Contact a local office

For any questions you may have:
+1 888 264 8988