On February 21, 2019, the U.S. Food and Drug Administration (FDA) announced a proposed rule to update the regulatory requirements for sunscreen products in the US.View Story Read More
With the aim to ensure that consumers can access safe and effective preventative sun care products from nonprescription, over-the-counter (OTC) channels, the FDA proposed to amend the regulatory requirements for sunscreen products using current scientific evidence and compliance with the Sunscreen Innovation Act (SIA). A summary of the proposed key updates is listed below:
The proposed amendments are under a comment period through May 28, 2019.
On February 6, 2019, the U.S. Federal Trade Commission (FTC) published a notice to seek public comments on whether to repeal, amend or retain the Guides for Select Leather and Imitation Leather Products (Leather Guides) in 16 CFR 24.View Story Read More
The Leather Guides, issued by the FTC in 1996, widely apply to the manufacture, promotion, and distribution of leather and imitation leather products including luggage, wallets and footwear. They provide instructions for the labeling of leather and imitation leather products. In addition, they address misrepresentations about the composition and characteristics of specific leather and imitation leather products and require marketers to deliver truthful, non-misleading information to consumers when selling imitation leather products.
The FTC seeks public comment on the continuing need for the Leather Guides through April 22, 2019.
On March 20, 2019, the U.S. Environmental Protection Agency (EPA) published a notice to conduct a prioritization process for 40 selected chemicals under the amended Toxic Substances Control Act (TSCA).View Story Read More
According to TSCA, the EPA is required to review chemicals currently in commerce on a regular basis. Among all 40 chemicals, 20 chemicals are classified as “High Priority Substances”, which required a subsequent three-year risk evaluation process to determine whether the chemicals pose hazards to human health and the environment. Twenty chemicals are classified as “Low Priority Substances” for risk evaluation.
A full list of the 40 chemicals included in the prioritization process can be found in the link below:
On January 21, 2019, the State of New York proposed the Consumer Right to Know Act in the latest Executive Budget in order to protect the public from unknown exposure to toxic chemicals.View Story Read More
In the proposal, a list of more than 1,000 carcinogens and other potential hazardous chemicals will be developed by the Department of Environmental Conservation (DEC), in consultation with the Department of Health and the Department of State. An on-package labelling requirement will be established to indicate the presence of the listed chemicals in consumer products.
Official legislative text has not yet been published. The government will work on measures to provide more information to consumers.
In February, 2019, the California Department of Toxic Substances Control (DTSC) proposed to list toluene-containing nail products as a Priority Product with a Chemical of Concern under the Safer Consumer Products (SCP) Regulation.View Story Read More
Toluene is a volatile solvent and commonly used in the manufacturing of nail products. Due to its high volatility at room temperature, toluene is readily released from products into the air causing inhalation, dermal and oral exposure. It has been found that exposure to toluene may pose adverse health effects in the nervous system and respiratory tract, as well as potentially cause developmental toxicity.
Upon approval, manufacturers of nail products containing toluene will be required to notify the DTSC within 60 days.
On February 5, 2019, the Office of Administrative Law (OAL) approved proposed amendments issued by the Office of Environmental Health Hazard Assessment (OEHHA) regarding the addition of No Significant Risk Levels (NSRLs) for the chemicals, Bromochloroacetic Acid and Bromodichloroacetic Acid in Title 27, California Code of Regulations, section 25705.View Story Read More
Bromochloroacetic Acid and Bromodichloroacetic Acid are carcinogens that are listed on the Proposition 65 Chemical list. For determining the safe harbor level of carcinogens in the environment, NSRLs are developed by the OEHHA. Daily exposure to carcinogens below corresponding NSRLs is considered to pose no significant risk to human health and therefore no Proposition 65 warning label is required.
|Bromodichloroacetic acid||71133-14-7||0.95 micrograms per day|
|Bromochloroacetic acid||5589-96-8||0.70 micrograms per day|
In March 2019, the California Office of Environmental Health Hazard Assessment (OEHHA) added a new chemical to the Proposition 65 List. The new chemical is:
The added chemical meets the requirements for listing under Proposition 65 as being known to the State of California to cause developmental toxicity and female reproductive toxicity. The chemical details are provided below:
|Date of addition||Chemical||Chemical Abstracts Service Number (CAS No.)||Types of Toxicity|
|March 8, 2019||Bevacizumab||216974-75-3||Developmental toxicity
Female reproductive toxicity
These guidelines provide information about flammability safety requirements for children’s sleepwear in sizes 0 to 14X, including bathrobes, sleepers and nightgowns that are manufactured, imported, advertised or sold in Canada. The following key updates are included in the new version of the guidelines:
Recently, Health Canada proposed an update to current flammability and labelling requirements in the Tents Regulations to address the flammability risk of tents found in the Canadian market. (See Regulatory Recap: March 2019). As a result of those proposed updates, certain play tent requirements shall be incorporated into the Toys Regulations as noted below:
The comment period for the proposed amendments ended March 23, 2019.
On February 14, 2019, the Commonwealth of Australia published an Amendment on Safety Standard for Prams and Strollers to expand the scope of strollers in the standard.View Story Read More
According to the amendment, the following statement was introduced to the scope of Consumer Product Safety Standard for Prams and Strollers:
“Strollers include wheeled vehicles that can operate in more than one mode, if one of those modes is designed to transport a child in a seated position (including, but not limited to, convertible tricycle strollers).”
The amendment came into force on February 14, 2019.
On February 26, 2019, Australia/New Zealand Standards issued a Notice of Intention to adopt the international toy safety standard, ISO 8124-1:2018, Safety of toys — Part 1: Safety aspects related to mechanical and physical properties.View Story Read More
The aim of the standard is to specify safety aspects related to the mechanical and physical properties that are generally applicable to toys for children up to the age of 14 years, taking into account normal use and reasonably foreseeable abuse. This standard will be identical to ISO 8124‑1:2018.
The public comment period for this proposal ended April 9, 2019.
On February 12, 2019, the European Chemical Agency (ECHA) proposed to amend Annex XVII of Regulation (EC) No. 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) through World Trade Organization (WTO) notification.View Story Read More
Upon enforcement, the proposed amendment adds the following substances to Annex XVII of REACH Regulation List of Restriction:
On March 13, 2019, the European Union (EU) proposed to amend Annex XIV of Regulation (EC) No. 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).View Story Read More
Upon enforcement, the proposed regulation will amend the Annex XIV List of Authorised Chemicals by adding the following 3 substances of very high concern (SVHC).
The proposed amendment is under a comment period through April 29, 2019.
On February 28, 2019, the European Committee for Standardization (CEN) announced new versions of food contact paper and paperboard standards relating to colorfastness, fluorescent fastness and antimicrobial constituents testing.View Story Read More
Below is a summary of the new standards for food contact paper and paperboard:
|Current standard||New standard||Details|
|EN 646: 2006||EN 646:2018||Determination of colorfastness in food contact dyed paper and board
|EN 648:2006||EN 648:2018||Determination of the fastness of fluorescent whitened paper and board
|EN 1104:2005||EN 1104:2018||Determination of antimicrobial constituents in food contact paper and board
Conflicting national standards will be withdrawn by May 2019.
On January 3, 2019, the Food Safety and Standard Authority of India (FSSAI) published the Food Safety and Standards (Packaging) Regulation, 2018 to replace the Food Safety and Standards (Packaging and Labelling) Regulation 2011. New labelling regulations were published separately.View Story Read More
The new regulations include both general and specific requirements for packaging materials. “Packaging material” in the new regulations is defined as materials such as cardboard, paper, glass, metal, plastic, and multi-layer packaging material used for the packaging of food products. A summary of important provisions of the new regulations follow:
The new regulations come into force on July 1, 2019.
In March 2019, the Taiwan Bureau of Standards, Metrology and Inspection (BSMI) announced a proposal through World Trade Organization (WTO) notification to update current mandatory inspection requirements for sunglasses and lenses of sunglasses.View Story Read More
As proposed in the amendment notification, inspection standard CNS 15067 will be updated to its 2017 version. Updates to the requirements include aspects of transmittance, spectral transmittance, detection of light signal etc. The Declaration of Conformity and relative conformity assessment procedure remains unchanged.
A summary of covered products and their applicable inspection standards is shown below:
|Product category||Reference C.C.C code||Inspection Standard after amendment|
|Sunglasses (inspection scope: nonprescription sunglasses for sun glare filters for general use, polarizing filters and gradient filters)||9004.10.00.00.6||CNS 15067 - 2017|
|Spectacle lenses of glass (inspection scope: nonprescription shaped and finished lenses of sunglasses)||9001.40.00.00.3|
|Spectacle lenses of plastics (inspection scope: nonprescription shaped and finished lenses of sunglasses)||9001.50.00.10.8|
The proposed amendments come into force on March 1, 2020.
On February 20, 2019, SASO issued a notice to certification bodies regarding the update of implementation plans for 1) Washing Machines and 2) Refrigerators/FreezersView Story Read More
The summary of the updates are as follows:
|Enforcement Day||Implementation Plan for Refrigerator and Freezer|
|December 31, 2019||Expiration of all Refrigerators, Refrigerator-Freezer and Freezers licenses with class E and F|
|January 1, 2020||Refrigerators, Refrigerator-Freezer and Freezers with class’ E’ and ‘F’ are not allowed in the market (Phase 2)|
|January 1, 2021||Implementation of phase 2 on market and initiation of market surveillance|
|Enforcement Day||Implementation Plan for Washing Machines|
|Currently enforced||Washing machines shall have minimum energy efficiency ratings as stated below for entering the market:
|September 30, 2020||Expiration of all Washing Machine licenses lower than class E|
|October 1, 2020||All washing machines shall have a minimum efficiency rating of ‘Class E’ to enter the market.
|October 1, 2021||Market surveillance will be commenced by Ministry of Commerce and SASO to verify the implementation of the new EER label design and regulations|
On March 21, 2019, the Communication and Information Technology Commission (CITC) issued a notice regarding the latest requirements for Universal Mobile Telecommunication System (UMTS) and LTE handsets and ancillary equipment that are intended for importation into Saudi Arabia.View Story Read More
The notice states that all equipment falling within the scope of CITC technical specification RI056, namely UMTS and LTE handsets and related terminal equipment, are required to at least support 4G and contain an CITC E-label to receive approval from CITC and enter into Saudi Arabia. The CITC has also cancelled all prior approved certificates for devices that fall within the scope of technical specification RI056 but do not support 4G.
On April 2, 2019, the Saudi Standards, Metrology and Quality Organization (SASO) announced that until the end of this year, they are accepting Energy Efficiency Certificate and Labelling (EER) registration of lighting products that have not completed the 2000 hours survival factor and lumen maintenance test.View Story Read More
SASO requires lighting products to comply with the EER requirement for entering Saudi Arabia. To obtain the EER certificate, reports for survival factor and lumen maintenance test of at least 2000 hours are required. In a notice dated April 2, 2019, SASO agreed to accept EER registration for lighting products that have not obtained the aforementioned reports, given the following conditions:
SASO may take legal procedures if manufacturer or supplier fails to submit test report within 30 days of the completion of the test.
شكراً لقد تم إرسال استفساراتك .
سوف يتم الرد على استفساراتك في أقرب وقت .
Thank you for subscribing.
+86 755 2223 9888مبيعات:
+86 755 2223 9086إختبارات المعامل:
+86 577 6160 3663
Contact a local office
For any questions you may have:
+1 888 264 8988
|هذا الموقع والعلامة التجارية محمي من قبل القوانين الدوليه وقوانين الولايات المتحدة الامريكية .|
|QIMA © 2021|
ClientID:; Client:; Affiliate:;