March 2022 Regulatory Update

NORTH AMERICA NEWS

USA: Maine Issues List of Food Contact Chemicals of High Concern

In December 2021, the Maine Department of Environmental Protection published the list of food contact chemicals of high concern.

View Story Read More

In June 2019, Maine signed the Toxic Chemicals in Food Packaging legislation into law. The law required the Maine Department of Environmental Protection (DEP) to publish a list of 10 or less food contact chemicals of high concern in order to determine their use in food packaging, if any, and identify if there are safer alternatives.

In December 2021, the DEP published the finalized list of 10 food contact chemicals of high concern. These chemicals are:

  • - Bisphenols structure (Bisphenol A, Bisphenol B, Bisphenol S, and Bisphenol F)
  • - 4-Octyl phenol
  • - Octamethyl cyclotetrasiloxane (D4)
  • - Toluene
  • - Styrene
  • - Benzene
  • - Methylenedianiline (MDA)
  • - Paraben structure (Propyl paraben, Butyl paraben, Methyl paraben and Ethyl paraben
  • - Benzophenone
  • - Nonylphenol
For More Information About This Story:
Contact: Carol Gao (Technical Consultant - FMCs)
Phone: (852) 3185 8000
Email: regulatoryupdates@qima.com

USA: Rhode Island and New Hampshire Propose Banning PFAS in Certain Products

The state of Rhode Island introduced Senate Bill 2049 on 25 January 2022 for the prohibition of per- and polyfluoroalkyl substances (PFAS) in food packaging, clothing and carpeting. Similarly, the state of New Hampshire also proposed an act (House Bill 1589) in early January 2022 for the prohibition of the sale of all products including, but not limited to, carpets or rugs containing intentionally added PFAS.

View Story Read More

The proposed act of Rhode Island, Senate Bill 2049, prohibits any person to manufacture, sell or distribute for use, food packaging containing intentionally added PFAS in any amount. The act also requires that any carpeting or clothing containing PFAS manufactured or sold in the state should carry a warning label. Any person who violates the provision shall be subject to a fine of not more than one thousand dollars for each offense. The act would take effect on 1 January 2023.

Another similar act prohibiting the sale of products containing intentionally added PFAS has been proposed in the state of New Hampshire, House Bill 1589, in which a wider product scope is covered.

  • - Beginning 1 January 2023, a written notification shall be submitted to the state department by any manufacturer of a product for sale that contains intentionally added PFAS.
  • - Beginning 1 January 2024, no person shall sell, offer for sale or distribute for sale in the state, a carpet, rug or a fabric treatment that contains intentionally added PFAS.
  • - Beginning 1 January 2030, the same restrictions shall be extended to any product that contains intentionally added PFAS.
For More Information About This Story:
Contact: Alex Hui (Senior Technical Manager)
Phone: (852) 3185 8000
Email: regulatoryupdates@qima.com

USA: Consumer Product Safety Commission (CPSC) Proposed Window Covering Rules

The US Consumer Product Safety Commission (CPSC) issued two Notices of Proposed Rulemaking to address unsafe accessible cords in both stock and custom window coverings.
The CPSC is accepting comments on both proposed rules until 23 March 2022.

View Story Read More

The CPSC issued two notices of proposed rulemaking (NPR) on 7 January 2022 for window coverings.

The purpose of the proposed rules is to address the risk of strangulation of children eight years old and younger associated with hazardous operating cords on custom window coverings.

One proposed rule would require operating cords on custom window coverings to meet identical requirement for operating cords on stock window coverings, as set forth in section 4.3.1 of ANSI/WCMA A100.1-2018, American National Standard for Safety of Corded Window Covering Products (ANSI/WCMA-2018). The ANSI standard requires stock window coverings to have:

  1. No operating cords (cordless) (section 4.3.1.1);
  2. Inaccessible operating cords (section 4.3.1.3); or
  3. Operating cords shorter than 8 inches in any use position (section 4.3.1.2)

The other proposed rule is to deem window coverings with the following characteristics to contain a "substantial product hazard" (SPH), as defined in section 15(a)(2) of the Consumer Product Safety Act (CPSA):

  1. The presence of hazardous operating cords on stock window coverings;
  2. The presence of hazardous inner cords on stock and custom window coverings; or
  3. The absence of a required manufacturer label
For More Information About This Story:
Contact: Vivian Chan (Technical Consultant)
Phone: (852) 3185 8052
Email: regulatoryupdates@qima.com

USA: New York State Published New Bill A9223, 2022 for Products Containing Small Magnets

On 9 February 2022, New York State published new Assembly Bill A9223 which prohibits the sale of magnetic jewelry meant to mimic a tongue piercing and requires a warning to be printed on other products containing a small magnet.

View Story Read More

The New York State assembly bill (Assembly Bill A9223) states a jewelry product that includes a small magnet and is marketed as a product designed to mimic a tongue, lip, or nose piercing is not allowed to be sold. Other consumer novelty products containing a small magnet must be labelled or tag-affixed with the below warning statement (or equivalent text.) This text must be distinctly visible to the consumer and printed in a clear and conspicuous type.

"WARNING. This product contains (a) small magnets. Swallowed magnets can stick together across intestines causing serious infections and death. Seek immediate medical attention if magnet(s) are swallowed or inhaled."

This requirement shall not apply to products that are required to comply with the magnet safety and labelling requirements of ASTM F963.

This act would take effect 120 days after being signed into law.

For More Information About This Story:
Contact: Vivian Chan (Technical Consultant)
Phone: (852) 3185 8052
Email: regulatoryupdates@qima.com

United States (US) Recalls Summary (01 February 2022 to 28 February 2022)

In the US, when hazards are identified in consumer products, they will be recalled and published in the Consumer Product Safety Commission (CPSC) Recent Recalls on the CPSC website, which is updated daily. The US recalls from 01 February 2022 to 28 February 2022 are summarized below:

View Story Read More
Hazards Frequency
Burn Hazard 6
Choking Hazard 4
Injury Hazard 4
Entrapment Hazard 2
Fall Hazard 4
Fire Hazard 7
Lead Poisoning Hazard 2
Other Hazards* 4

* Other Hazards include Drowning Hazard, Tip-Over Hazard, Laceration Hazard and Electric Shock Hazard with a frequency of less than 2.


Product Categories Frequency
Fabric / Textile / Garment / Home Textile 6
Toys and Childcare Products 6
Tools and Hardware 2
Furniture 2
Sporting Goods / Equipment 1
Home Electrical Appliances 4
Electrical Appliances 2
Household Items 3
Food Contact Material 1

For a complete list click here


Canada Recalls Summary (01 February 2022 to 28 February 2022)

In Canada, when hazards are identified in consumer products, they will be recalled and published in the Recalls and Safety Alerts Database on the Health Canada website, which is updated daily. The Canada recalls from 01 February 2022 to 28 February 2022 are summarized below:

View Story Read More
Hazards Frequency
Health Risk Hazard 4
Risk of Allergy 6
Burn Hazard 3
Chemical Hazard 2
Fire Hazard 2
Microbiological Hazard 4
Choking Hazard 3
Other Hazards* 5

*Other Hazards include Aspiration Hazard, Injury Hazard, Strangulation Hazard, Fall Hazard and Laceration Hazard with a frequency of less than 2.


Product Categories Frequency
Pharmacy 2
Food 9
Household Items 4
Fabric / Textile / Garment / Home Textile 4
Bodycare / Cosmetics 3
Other Categories* 6

*Other Categories include Home Electrical Appliances, Tools and Hardware, Medical Devices, Food Contact Material, Toys and Childcare Products and Protective Equipment with a frequency of less than 2.


For a complete list click here


SOUTH AMERICA NEWS

Brazil: The Conformity Assessment Requirements for Sound Power Levels of Electrical Appliances, Portaria No. 6, 2022

On 21 January 2022, the Brazilian Institute of Metrology, Standardization and Industrial Quality (INMETRO) approved the requirements for the conformity assessment and the specifications for the seal of conformity identification for the sound power of domestic appliances, as set out in Annexes I and II respectively of this Regulation.
The assessment of conformity through the certification process must be carried out by a product certification body, known as an OCP, established in Brazil, and accredited by INMETRO, in accordance with the requirements approved in this Regulation.

View Story Read More

Portaria No. 6, approved by the Brazilian Institute of Metrology, Standardization and Industrial Quality (INMETRO), outlines the requirements for the conformity assessment and the specifications for the seal of conformity identification for the sound power of the following domestic household and commercial appliances:

  1. vacuum cleaner;
  2. blender;
  3. hair dryer; and
  4. other devices that function in the same way.

These Regulations entered into force on 1 February 2022.

The validity period of the CoC (Certificate of Conformity) is 12 months from the date of its being granted. The certification process must be carried out by an OCP, an approved certification body established in Brazil and accredited by Inmetro.

The criteria for authorizing the use of the Conformity Identification shall follow the requirements established in Portaria No. 200/2021 and Annex II.

CONFORMITY IDENTIFICATION SEAL

  1. The conformity identification seal, in the form of a noise stamp, must be attached to the equipment by means of adhesive or to its packaging by means of adhesive or printing and is specified below.
  2. The minimum size, color and type of source characteristics of the conformity identification stamp, the noise stamp, are listed in Figure 1.
For More Information About This Story:
Contact: Vincent Wong (Technical Consultant for E&E)
Phone: (852) 3185 8000
Email: regulatoryupdates@qima.com

EUROPE NEWS

EU: Proposal to Ban PFAS – “Forever Chemicals” in Firefighting Foams

The European Chemicals Agency has proposed a ban for the placing on the market, use and export of all per- and polyfluoroalkyl substances (PFASs) in firefighting foams. There is a six-month consultation period set to begin on 23 March 2022.

View Story Read More

On 23 February 2022, the European Chemicals Agency (ECHA) published the news on REACH Annex XV restriction dossier about the use of PFASs in firefighting foams that are not adequately controlled, based on the risks posed to human health and the environment. A restriction is the most appropriate means to address these chemicals and the "whole PFAS class restriction" will prevent "regrettable substitution" in the future.

ECHA has reviewed the strengths and weakness of five different options, including the overall ban, to manage the associated risks of PFASs in firefighting foam. The blanket restriction (ban), with use or sector-specific transition periods included, has been picked as the "final" option as it is the most effective in targeting the identified risks and is the most pragmatic option as it relates to enforcement and monitoring.

In this proposed restriction, the concentration of total PFASs in firefighting foams cannot exceed 1 ppm. There is a transition period included for the industry so that enough time is allowed for replacing PFAS-containing foams without compromising fire safety. A six-month period beginning on 23 March 2022 is planned and will be open for the public to give evidence-based comments on the proposal. By early 2023, the European Commission will prepare a draft regulation considering ECHA's proposal and the combined opinions of the scientific committees.

It should be noted that several European countries are also beginning the development of a restriction proposal intended to cover PFASs in uses other than firefighting foams. This proposal is targeted for submittal to ECHA in January 2023.

For More Information About This Story:
Contact: Alex Hui (Senior Technical Manager)
Phone: (852) 3185 8000
Email: regulatoryupdates@qima.com

France: Proposed Mineral Oil Requirements Under Anti-waste and Circular Economy Law

A proposal on regulating two categories of mineral oil in ink on packaging and printed paper matter has been submitted in France. The restriction would be implemented by two phases starting 1 January 2023.

View Story Read More

On 3 February 2022, the World Trade Organization (WTO) announced a draft Decree from France's Ministry for Ecological Transition (Ministère de la Transition écologique), under WTO document no. 22-0881, on the intention to regulate two categories of mineral oils and addressed requirements related to Article 112 of Decree No. 2020-105 “Fight Against Waste and the Circular Economy”. The detailed content of Article 112 is shown in table 1.

Table 1. Scope of the ban on use of mineral oil and corresponding effective date under Article 112 of Decree No. 2020-105

Product Scope Effective date
Packaging January 1, 2022
Printed matter of paper for public * January 1, 2025
* For advertising prospectus letters and unsolicited catalogs aimed at commercial promotion
Note: conditions of application are defined by the Decree

The draft Decree contains several important provisions as listed below:

  • - Changes the date of entry into force of Article 112 of Decree No. 2020-105 to 1 January 2023 onwards
  • - Defines mineral oils as "oils produced from feedstocks derived from petroleum hydrocarbons used in the manufacturing of inks"
  • - Provides definition of mineral oils covered by the ban as: mineral oil aromatic hydrocarbons (MOAH) consisting of 1-7 aromatic cycles and mineral oil saturated hydrocarbons (MOSH) consisting of 16-35 carbon atoms
  • - Specifies requirements for MOAH and MOSH in ink:
    • ≤ 0.1% MOAH (≤ 1 ppb MOAH compounds consisting of 3 to 7 aromatic cycles from 1 January 2025)
    • ≤ 1% MOSH (≤  0.1% MOSH from 1 January 2025)

There are two transitional periods:

  • - Packaging and printed matter of paper manufactured or imported before 1 January 2023, are required to be disposed of by 31 December 2023
  • - Compliant packaging and printed paper manufactured or imported before each of the deadlines in the aforementioned point 4 are required to be disposed of within 12 months from those deadlines

According to the WTO document, the proposed date of adoption and the proposed date of draft Decree entry into force will be on 30 June 2022 and 1 January 2023, respectively.

For More Information About This Story:
Contact: Alex Hui (Senior Technical Manager)
Phone: (852) 3185 8000
Email: regulatoryupdates@qima.com

Italy: Italy’s New Environmental Labelling

On 11 September 2020, issue no. 116 of the Official Journal of the Italian Republic published Legislative Decree no. 3 of September 2020, which implements EU Directive 2018/851 on waste and EU Directive 2018/852 on packaging and packaging waste.
According to the new Italian Legislative Decree, all products must have applicable "environmental labelling" on its packaging.
The effective date is 30 June 2022.

View Story Read More

As stated in Italy's Legislative Decree no. 3 of issue no. 116/2020, "all packaging shall be appropriately labelled in accordance with the procedures established in the applicable UNI technical standards and in compliance with the decisions adopted by the European Commission, in order to facilitate the collection, reuse, recovery and recycling of the packaging, and to provide consumers with proper information on the final destination of packaging." UNI stands for Italian National Standards Institute.

The following includes wording suggested by CONAI, the National Packaging Consortium, although the legislation does not dictate precise required verbiage.

Environmental Labelling of SINGLE-COMPONENT packaging destined for the end consumer; the following information should be given:

  1. The packaging material's identification code under Decision 129/97/EC.
  2. Collection guidelines. It is advisable:
    • To specify the wording "Collection (main material family by weight)" or
    • To indicate the main material family by weight, accompanied by the wording "Separate collection", and invite the consumer to check the provisions of his or her Municipality.
  3. Other information that may be voluntarily added to environmental labels as it relates to the type of packaging and as it offers instructions that will guide the consumer towards efficiently being able to separate waste collection.

Environmental Labelling of MULTI-COMPONENT packaging destined for the end consumer; the following information should be given:

  1. Type of packaging (full written description or graphic representation) of the various components that can be separated by hand.
  2. Identification code of the packaging material of each component that can be separated by hand under Decision 129/97/EC.
  3. Collection guidelines, clearly specifying the material family of each component.
  4. Voluntary information to help the consumer separate waste efficiently.

Environmental labelling of packaging destined for professionals, or transport packaging, or packaging related to logistics or exhibition activities must bear:

  • Code of the composition materials in accordance with Decision 129/97/EC (all other information remains as voluntary.)

The effective date of the previously mentioned environmental labelling is 30 June 2022.

For More Information About This Story:
Contact: Vivian Chan (Technical Consultant)
Phone: (852) 3185 8052
Email: regulatoryupdates@qima.com

Europe Recalls Summary (01 February 2022 to 28 February 2022)

In Europe, when hazards are identified in Non-food Consumer Products, the Products will be recalled and published in the Safety Gate system, which is updated weekly. The European recalls from 01 February 2022 to 28 February 2022 are summarized below:

View Story Read More
Hazards Frequency
Chemical Hazard 48
Injury Hazard 19
Strangulation Hazard 6
Choking Hazard 26
Environmental Hazard 8
Electric Shock Hazard 11
Health Risk Hazard 7
Fire Hazard 12
Burn Hazard 11
Other Hazards* 19

*Other Hazards include Drowning Hazard, Entrapment Hazard, Damage to Sight, Suffocation Hazard, Microbiological Hazard, Damage to Hearing and Cut Hazard with a frequency of less than 6.


Product Categories Frequency
Toys and Childcare Products 44
Outdoor Living Items 6
Fabric / Textile / Garment / Home Textile 12
Sporting Goods / Equipment 7
Electrical Appliances 10
Bodycare / Cosmetics 18
Machinery 5
Protective Equipment 10
Chemicals 7
Other Categories* 14

*Other Categories include Household Items, Food Contact Material, Computer / Audio / Video / Other Electronics & Accessories, Footwear, Home Electrical Appliances, Jewelry and Furniture with a frequency of less than 4.


Notifying Country Frequency
Hungary 20
Lithuania 4
Belgium 4
Sweden 22
France 13
Germany 10
Slovakia 9
Latvia 5
Luxembourg 5
Poland 7
The Netherlands 4
Finland 4
Ireland 5
Romania 5
Other Countries* 16

*Other Countries include Spain, Italy, Austria, Bulgaria, Malta, Norway, Iceland, Croatia, Denmark and Czechia with a frequency of less than 4.


For a complete list click here


OCEANIA NEWS

New Zealand: Unsafe Goods (Inclined Infant Sleep Products) Indefinite Prohibition Notice 2022 Issued

On 9 February 2022, New Zealand published a notice of Unsafe Goods (Inclined Infant Sleep Products) Indefinite Prohibition Notice 2022 to mitigate the risk of infant deaths attributed to the use of inclined infant sleep products.

View Story Read More

The New Zealand Unsafe Goods (Inclined Infant Sleep Products) Indefinite Prohibition Notice 2022 recognizes and responds to the risks posed to infants in New Zealand by banning the further supply of new or second-hand inclined infant sleep products. It also recognizes that inclined infant sleep products do not align with internationally recognized guidelines for a safe infant sleep environment, which recommend a firm and flat sleep surface.

In this notice, as listed in the interpretation, unless the context requires otherwise:
Infant means a child under one year of age;
Inclined infant sleep product means any product:

  1. Which is intended to contain an infant; and
  2. Which is designed, intended, marketed, or contains any representation that it is suitable for an infant to sleep in; and
  3. Which is freestanding, or designed to be attached to another structure; and
  4. Which has a sleep surface angled more than seven degrees from horizontal when
    1. The product is unladed; and
    2. At any angle designed, intended, or marketed for sleep; and
    3. The product is at rest, in the case of products that rock or swing; and
  5. Excluding medical devices; and
  6. Excluding hammocks, being products constructed from a flexible material and suspended from above or either side.

As stated in the application section, this notice does not apply to:

  1. Child restraints such as car seats or capsules, being products designed for the transport of children and that comply with the Land Transport (Road User) Rule 2004;
  2. Wheeled products designed to transport children, such as prams or strollers;
  3. Products that are designed to carry an infant on the body of another person, such as slings and baby carriers;
  4. Products with an adjustable incline, where every angle designed, intended, or marketed for sleep is equal to or less than seven degrees from the horizontal;
  5. Products that are:
    1. Designed, intended, and marketed only for play and/or the amusement of infants and young children, such as bouncers and play seats; and
    2. Not designed, intended, marketed, or containing any representation that they are suitable for sleep.

The effective date of this notice was 9 February 2022.

For More Information About This Story:
Contact: Vivian Chan (Technical Consultant)
Phone: (852) 3185 8052
Email: regulatoryupdates@qima.com

Australia Recalls Summary (01 February 2022 to 28 February 2022)

In Australia, when hazards are identified in consumer products, they will be recalled and published in the Recalls and Safety Alerts Database on the Australian Competition & Consumer Commission website, which is updated daily. The Australia recalls from 01 February 2022 to 28 February 2022 are summarized below:

View Story Read More

Hazards Frequency
Burn Hazard 3
Choking Hazard 6
Risk of Allergy 5
Health Risk Hazard 4
Fire Hazard 2
Injury Hazard 12
Suffocation Hazard 2
Drowning Hazard 2
Other Hazards* 3

*Other Hazards include Fall Hazard, Microbiological Hazard and Entrapment Hazard with a frequency of less than 2.


Product Categories Frequency
Toys and Childcare Products 5
Food 5
Medical Devices 5
Electrical Appliances 2
Tools and Hardware 2
Sporting Goods / Equipment 3
Other Categories* 6

*Other Categories include Food Contact Material, Car Components, Outdoor Living Items, Pharmacy, Computer / Audio / Video / Other Electronics & Accessories and Furniture with a frequency of less than 2.


For a complete list click here


ASIA NEWS

China: Stainless Steel Vacuum Container Standard GB/T 40355-2021 Comes into Effect

On 20 August 2021, the China State Administration for Market Regulation (Standardization Administration) published the Stainless Steel Vacuum Container Standard GB/T 40355-2021. The implementation of this standard began on 01 March 2022.

View Story Read More

On 20 August 2021, the China State Administration for Market Regulation (Standardization Administration) published the Stainless Steel Vacuum Container Standard GB/T 40355-2021.

Highlights of standard GB/T 40355-2021:

  • - Standard is a voluntary standard.
  • - Standard applies to food contact stainless steel vacuum containers for daily use.
  • - Standard categorizes the stainless steel vacuum container products based on function, usage and types of sealing and outlines requirements for stainless steel vacuum container by categories.
  • - The requirements include stainless steel material type, stability, deviation of capacity, efficiency of insulation, impact resistance, appearance, etc.
  • - Identifies that all food contact components of stainless steel vacuum containers shall comply with related mandatory food contact materials regulations.
  • - Includes marking, labeling and product instruction.

This standard came into effect on 01 March 2022.

For More Information About This Story:
Contact: Carol Gao (Technical Consultant - FMCs)
Phone: (852) 3185 8000
Email: regulatoryupdates@qima.com

CHINA: Standard FZ/T 81014-2008 Infant's Wear Officially Abolished

Standard FZ/T 81014-2008 for infant's wear was officially abolished.
The effective date was 26 January 2022.

View Story Read More

Per No. 44 notice in 2021 of MIIT (Ministry of Industry and Information Technology of the People's Republic of China), there were a total of 87 standards abolished, 360 standards updated, and 1287 standards continuing to be in effect. The notice covered nine industries including textiles, in the batch review of industry standards.

Among these previously mentioned changes, was standard FZ/T 81014-2008 for infant's wear which has been abolished since the notice publication day of 26 January 2022. The scope of this standard included, but was not limited to, the terms and definitions of woven infant clothing, requirements, test methods, inspection classification rules, and signs, packaging, transport, and storage.

Currently, national standard GB/T 33271-2016 for infant's woven garments is in effect and is to be followed in place of FZ/T 81014-2008.

For More Information About This Story:
Contact: David Zhao (Technical Consultant)
Phone: (852) 3185 8000
Email: regulatoryupdates@qima.com

China Recalls Summary (01 February 2022 to 28 February 2022)

In China, when hazards are identified in consumer products, they will be recalled and published in the SAMR Defective Product Administrative Centre, which is updated daily. The China recalls from 01 February 2022 to 28 February 2022 are summarized below:

View Story Read More
Hazards Frequency
Burn Hazard 1
Health Risk Hazard 2
Safety Risk Hazard 1
Chemical Hazard 2

Product Categories Frequency
Food Contact Material 3
Furniture 2
Computer / Audio / Video / Other Electronics & Accessories 1

Provinces Frequency
Guangxi 2
Liaoning 2
Beijing 1
Jiangsu 1

For a complete list click here


MARCH CONTRIBUTORS

Vivian Chan

Vincent Wong

David Zhao

Carol Gao

Alex Hui

View the complete regulatory update
هل تحتاج إلى معلومات أخرى؟

سيصلك ردنا فى خلال ٢٤ ساعه

Checking...
Checking...
Checking...
Checking...
Checking...
Checking...
Checking...
Checking...
Checking...
Checking...
Checking...
Checking...
Checking...
Checking...

بتواصلك مع QIMA، فأنت توافق على سياسة الخصوصية والشروط والأحكام الخاصة بنا

Subscribe to our Regulatory Updates

Receive a monthly update on product safety standards news.

 
تلقى مستجدات سلسلة التوريد من قيمة. يمكنك دائمًا إلغاء الاشتراك وإدارة تفضيلات بريدك الإلكتروني لاحقًا.

بتواصلك مع QIMA، فأنت توافق على سياسة الخصوصية والشروط والأحكام الخاصة بنا

اتصل بنا عبر الهاتف
الهاتف

Contact a local office


For any questions you may have:
+1 888 264 8988